ما الأدوات المطلوبة لتركيب GRC؟ معايير تجهيز أدوات التركيب من تشينغلونغ لـ GRC

GRC installation requires professional tools and equipment for assurance. According to installation process requirements, four main categories of tools are typically needed: measuring, cutting, fixing, and inspection. Based on 28 years of installation experience, Qinglong GRC has established comprehensive tool configuration standards.

In the Wuhan Han Show Theatre project, the installation team was equipped with a complete set of professional tools: a Leica total station for measurement, with layout precision of ±1mm; a German-imported stone cutting machine for cutting, producing smooth cuts without edge chipping; a dedicated hydraulic lifting platform for fixing, safe and efficient; and an electronic level for inspection, with precise flatness control. This professional tool configuration ensured the installation quality of the project, with installation deviations of over ten thousand shaped GRC panels all controlled within permissible limits.

Measuring and Positioning Tools

A total station is used for datum point surveying, with a precision requirement of ±1″. A laser line projector is used for wall line marking to ensure accurate positioning. A digital level checks flatness with a precision of 0.1°. These tools guarantee installation precision.

Cutting and Trimming Tools

A stone cutting machine is used for panel cutting, fitted with dedicated cutting blades. An angle grinder handles edges and corners and must be equipped with a dust removal device. An electric drill makes openings using carbide drill bits. Tool performance directly affects installation quality.

Installation and Fixing Tools

An electric torque wrench controls bolt tightening force with a precision of ±3%. A hydraulic lifting platform ensures safety for work at height. Vacuum suction cups lift large panels safely and reliably. Specialized tools improve installation efficiency.

Inspection and Acceptance Tools

A feeler gauge checks panel joint width with a precision of 0.1mm. A straightedge detects flatness, 2m in length. An infrared distance meter verifies dimensions. These tools ensure acceptance standards.

Professional tools are the guarantee of installation quality. It is recommended to choose an installation team with complete tools and standardized management.