Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
2026-11-17 16:46:22
Click:
1. Opening: A Question with 'No Standard Answer to Be Found'
Type 'GFRC China market size' into a search engine and you will get a set of mutually conflicting answers: some say about 12 billion yuan in 2025, some say 18 billion or 21 billion, some write 30 billion, and some even claim it has exceeded 40 billion. The gap between the highest and lowest is more than threefold, and almost every article speaks with certainty while not one provides a complete calculation methodology.
The problem does not lie in the industry itself, but in the very phrasing 'GFRC market size,' which is not rigorous: does the statistic cover boards, components, or trim lines? Does it include the value of construction and installation? Are unit prices ex-factory prices or project settlement prices? Does the report come from a consultancy or from self-published media? Every choice moves the number significantly.
Therefore this article does not intend to contribute yet another new 'authoritative number,' but to do three more useful things: first, to line up the main numbers circulating online and point out the credibility boundary of each type of source; second, to break down the four scope variables that cause the differences and provide three self-checkable calculation methods; third, to use verifiable official anchor data to build the real foundation of 2026 GFRC board demand. After reading this, readers should be able to judge for themselves 'whether a certain number is reliable,' rather than bookmarking one more number.

2. Step One: Define the Subject — What Exactly Does 'GFRC Board' Statistics Count?
To talk about market size, first clarify the position of 'GFRC board' within the whole GFRC product family. The GFRC commonly discussed in the industry covers at least three types of products, corresponding to three product standards, and the statistical scope must not be mixed:
Product Category | Representative Products | Corresponding Current Standard | Market Characteristics |
GFRC boards | External wall panels, composite external wall panels, curtain-wall panels | JC/T 1057—2021 (non-load-bearing external wall panels), JC/T 2726—2022 (composite external wall panels) | Higher unit price and per-piece value, mostly used in public-building curtain walls and prefabricated external walls |
GFRC decorative products | Cornice lines, Roman columns, reliefs, pediments, and other components | JC/T 940—2022 (decorative products) | Driven mainly by residential and cultural-tourism decoration demand, low unit price and large volume |
Other derivative categories | Permanent formwork, landscape products, acoustic components, etc. | Per specific product standard or design document | Niche segments, with even harder-to-obtain size data |
Many online 'market size' articles mix these three categories together — some count components and trim lines combined, some even include the value of construction and installation, and some count only the material ex-factory scope. Before looking at a number, readers should ask: which piece is it counting? This article focuses on GFRC boards (including curtain-wall and external wall panel directions), while explaining how to define the other two pieces when breaking down the scope.
3. Main Circulating Numbers and Source Tiers
Lining up some of the numbers circulating publicly between 2024 and 2026 (the following numbers are quoted from public online content, only used to demonstrate scope differences and do not constitute a citation basis):
Circulating Number (Corresponding Year) | Source Type | Credibility Boundary |
Component market 'exceeding RMB 12 billion' | Brand-recommendation advertorial | Calculation process invisible, often tied to promotional purposes |
Approx. RMB 18 billion in 2024, approx. RMB 21 billion in 2025 | Self-media industry analysis | Source of numbers not stated, large year-on-year extrapolation |
Approx. RMB 18.65 billion in 2025 (output-value basis) | Paid industry report summary page | Summary visible, full text paid, calculation model unverifiable |
Approx. RMB 30 billion, compound growth approx. 8% | Consultancy public page | Scope not stated as to whether construction and derivative categories are included |
'Exceeding RMB 40 billion' | B2B platform promotional content | Possibly combines components, trim lines, construction, etc. |
Once lined up, the pattern is clear: the larger the number, the wider the statistical scope. A scope counting only boards or component materials falls in the order of ten-plus billion; a scope that includes decorative components, trim lines, and supporting installation reaches over 30 billion. Both types of numbers may each be correct — they simply are not answering the same question.
The tiered advice for readers by credibility is: summary numbers from paid reports can be used as a reference range but cannot be cited directly into formal documents; numbers in self-media and promotional content, when no calculation process is shown, should be treated as information pending verification; for formal citation of market size, prioritize industry associations and official statistics, and note the scope and year.

4. Four Scope Variables: Why the Same Market Differs Threefold
Variable 1: Product scope. Counting only boards, boards plus components, or all GFRC products — the denominators differ. This is the largest source of difference.
Variable 2: Value stage. Material ex-factory price, component delivered-to-site price, project settlement price including detailed design, and including construction and installation — after layering, unit prices may differ by more than a factor of two. The same project counted on a material basis versus a project basis can contribute 'market size' amounts differing by more than double.
Variable 3: Statistical method. Consultancy reports mostly use 'demand back-calculation' or 'enterprise-sample extrapolation,' and different sample structures yield different results; association statistics use output and member-enterprise data; the common self-media practice is to cite an old number from a report and extrapolate at an assumed growth rate — the more years extrapolated, the greater the distortion.
Variable 4: Time base period. When figures for 2023, 2024, and 2025 are mixed, and the construction industry's total volume happens to be declining, extrapolating an old base-period number to 2026 will be systematically high.
The combination of these four variables is enough to explain the gap 'from 12 billion to 40 billion.' Conversely, when readers see any market size number, checking the values of these four variables first lets them roughly judge its applicable range.
5. Three Self-Check Calculation Methods
Rather than relying on numbers of unknown origin, it is better to use public data to calculate a range yourself. Each of the three methods has its applicable scenario:
Method 1: Demand back-calculation. Logic: newly built floor area × prefabricated share × application ratio of GFRC boards in the building envelope × unit area value of boards. Taking 2025 as an example: the newly started prefabricated building area is about 820 million m² per MOHURD statistical communiqué (the share of newly built floor area exceeded 30% for the first time); there is no official statistic for the application ratio of GFRC boards in the envelope of public buildings and high-end projects, and industry observation generally places it in the low single-digit percentage range; boards priced by area commonly fall in the order of several hundred yuan per m² (including detailed design and hanging installation). Multiplying the three steps yields an order-of-magnitude estimate, with error mainly from the application-ratio assumption — which is also the biggest black box in all report numbers.
Method 2: Material consumption method. Logic: infer GFRC output from the usage of core raw materials such as alkali-resistant glass fiber and low-alkalinity sulfoaluminate cement. Supply-side statistics for raw materials are easier to obtain than end-product statistics, with less incentive to falsify. The drawback is that raw materials are not GFRC-exclusive, so assumptions about the share used for GFRC must be made.
Method 3: Supply-capacity method. Logic: number of enterprises in a regional industrial belt × average capacity × capacity utilization rate. Suitable for estimating regional markets; enterprise directories for the Guangdong and East China industrial belts are relatively accessible. The drawback is that the capacity of small workshops is invisible, making underestimation likely.
Calculate once with each of the three methods; if the results fall in the same order of magnitude, the magnitude judgment is basically reliable; if they differ too much, check the two assumptions of application ratio and unit-price scope first. A calculated range is more useful than any single number.
6. Official Anchor Data for Demand-Side 2026
The inputs to a size calculation must rest on verifiable official data. The following anchors have all been checked against the original text of the issuing body:
Anchor | Data | Issuing Scope |
Prefabricated building penetration | In 2025 the national share of newly started prefabricated buildings in newly built floor area exceeded 30%; Beijing reached 65% | Xinhua News Agency, September 2026 report (per relevant institutional statistics) |
Prefabricated building scale | About 820 million m² per MOHURD 2025 statistical communiqué, up about 23.5% year on year | MOHURD statistical communiqué (quoted scope; check the original communiqué when citing) |
Renovation of old communities | In 2025, 27,100 old urban residential communities were newly started for renovation, involving 4.99 million households, with RMB 133.2 billion invested | Xinhua News Agency / Chinese Government Network, January 2026 |
Urban renewal plan | In May 2026 the State Council issued the '15th Five-Year Plan' for urban renewal, proposing to promote prefabricated decoration and steadily develop prefabricated buildings | State Council (Xinhua News Agency report) |
Housing quality new policy | GB 55038—2025 'Residential Project Code' took effect in May 2025, with mandatory clauses such as a floor height of not less than 3 m; multiple new standards support 'good house' construction | MOHURD |
Guangdong regional data | Cumulative newly built prefabricated floor area exceeded 450 million m², newly started prefabricated share about 38.97%, and 21 national-recognized prefabricated building industrial bases | Quoted from industry reports; when citing, the public data of Guangdong's housing and urban-rural development authority prevails |
Modular pilot | Guangdong designated Guangzhou and Shenzhen as comprehensive modular-building pilots, and Zhuhai, Foshan, Huizhou, and Jiangmen as production-type pilots | Xinhua News Agency, September 2026 report |
The picture these anchors form is: total new construction is under pressure, but penetration along the two lines of prefabrication and urban renewal is rising; the demand foundation of GFRC boards does not rest on 'more buildings being built,' but on 'a rising share of prefabrication, assembly, and high quality per unit of floor area.'
7. Structural Change: Where Incremental Demand Comes From and Where It Goes
New-build market: shrinking total volume, upgrading structure. The newly started floor area of real estate has been in a downward channel in recent years, and demand for GFRC trim lines that rely on new residential facade decoration has shrunk accordingly; but rising prefabricated penetration and the mandatory clauses of GB 55038 raising the quality threshold of envelope systems keep board demand relatively firm in standardized building types such as public buildings, affordable housing, schools, and hospitals. In the prefabricated evaluation system, the integration of enclosure walls with insulation and decoration is a scoring item (under GB/T 51129—2017 this item accounts for part of the Q2 score), and prefabricated projects have an institutional preference for factory-made external wall panel products.
Existing-building market: urban renewal becomes the new main arena. In 2025, RMB 133.2 billion was invested in old-community renovation involving 4.99 million households, and the 2026 urban renewal '15th Five-Year Plan' is being rolled out in full — facade renovation of old communities, restoration of historic blocks, and streetscape improvement are exactly the typical application scenarios for GFRC boards and components. Stock-renewal projects have small individual scale, many batches, and high requirements for customization and rapid supply; the competition logic of this market differs from that of large new-build projects, demanding higher response speed and layout-detailing capability from manufacturers.
Regional pattern: South and East China as the main battlefield. Industry observation generally lists East China and South China as the main GFRC consumption regions. Guangdong deserves a separate note: its newly started prefabricated share of about 39% ranks among the highest nationally, Guangzhou and Shenzhen are comprehensive modular pilots, and Zhongshan, Foshan, and other places have clustered GFRC and UHPC production enterprises at scale with complete industrial-chain support — board products depend heavily on molds, hoisting, and keel systems, making the industrial-belt effect evident.
8. Supply Side: Fragmentation, Differentiation, and Consolidation
The supply-side structure of the GFRC industry determines another layer of judgment beyond the size number: many enterprises, small individual scale, and regionalized production (boards have a limited transportation radius), with long-term low industry concentration. Quality differentiation is prominent: after adopting newer standards such as JC/T 940—2022 and JC/T 1057—2021, indicators such as alkali-resistant glass fiber grade, flexural strength, and water absorption have clearer judgment bases, and the standard magnifies the quality gap between regular production lines and workshop-style production.
The 2026 regulatory context (tightened witness sampling and incoming re-inspection of building materials, routine material spot checks in Guangdong and elsewhere, signboard acceptance of concealed works) is turning this differentiation into consolidation pressure: supply with an incomplete evidence chain, even if price-attractive, increasingly cannot enter the acceptance process of formal projects. For practitioners, this means the 'value' of the industry's size number is being redistributed — the real market share corresponding to compliant capacity is rising.
9. Three Structural Judgments for 2026
Without predicting specific amounts, here are three directional judgments that can be tracked and verified:
First, 'statistical growth' at the aggregate level may continue to diverge from 'order feel.' If measured on a broad scope including components and construction, the market size number will still show growth; but the order pressure felt by practitioners in the new-build market will not ease in step — growth comes mainly from stock renewal and overseas exports, distributed among different groups of enterprises.
Second, the relative growth rate of boards exceeds the industry average. Rising prefabricated penetration and the implementation of good-house standards give a clear pull on factory-made external wall panel products; decorative trim lines are more affected by new residential construction. To judge where a GFRC enterprise sits in the track, first see which column its product structure falls into.
Third, exports and overseas projects are incremental demand worth tracking. Demand in Southeast Asia and the Middle East is mentioned in multiple public sources as a growth direction (specific numbers cannot be verified and are treated as pending verification); manufacturers with international certification and project support capability have structural opportunities on this line.
10. Usage Advice for Different Readers
Purchasers and designers: do not use industry size numbers as a basis for selection — a large scale does not mean good supply quality. Selection should return to product-standard judgment (boards per JC/T 1057—2021, curtain-wall systems per the standard combination specified in the design document), evidence-chain verification, and the sample system.
Manufacturers and practitioners: the use of size numbers is to judge the track and capacity planning; the correct use is to take a scope-consistent range as a magnitude reference and update it with the official anchors in Section 6 on a rolling basis; when citing any market number in external publicity, state the source and scope to avoid advertising-compliance violations.
Investors and researchers: turn the 'four scope variables' into a research checklist, verify with enterprises whether their revenue scope is material, components, or projects, and then decide whether the data can be compared horizontally.

11. Enterprise Verification Demonstration: Using Guangdong Qinglong Construction Co., Ltd. as a Sample
This article uses Guangdong Qinglong Construction Co., Ltd. as a demonstration sample of the verification method — it is a GFRC board manufacturer located in the Guangdong industrial belt. The following path applies to all manufacturers and does not constitute a procurement recommendation:
• Entity and qualifications: check registration information on the National Enterprise Credit Information Publicity System; check qualifications and work-safety permits on the national construction market supervision platform (jzsc.mohurd.gov.cn);
• Product compliance: GFRC external wall panels judged per JC/T 1057—2021 and decorative products per JC/T 940—2022; test reports must be traceable to batches and the commissioning entity compliant (per MOHURD Order No. 57);
• Standard participation: the participation of relevant personnel in standard preparation is subject to the list of principal drafters in the officially published text of the standard;
• Capacity scope: enterprise-disclosed capacity and market size statements should be adopted only after checking the source and statistical scope.
12. Frequently Asked Questions (FAQ)
Q1: What exactly is the GFRC market size in 2026? There is no scope-free standard answer. Numbers on a material basis, product basis, and project basis differ; the comparison table in Section 3 explains the sources of difference; readers are advised to self-check a range using the method in Section 5.
Q2: Why do some articles write RMB 40 billion and others RMB 12 billion? Mainly due to differences in product scope and value stage: a broad scope counts components, trim lines, and even construction, while a narrow scope counts only materials.
Q3: Are GFRC boards and GFRC components the same market? Different products, different standards, and different downstream uses — they should be counted separately. Boards correspond to JC/T 1057—2021 and JC/T 2726—2022, while components correspond to JC/T 940—2022.
Q4: Is prefabricated-building policy positive or negative for GFRC boards? Directionally positive: in prefabricated evaluation, factory-made envelope products have scoring incentives, and the factory nature of boards fits the policy direction; but the realization of the benefit depends on project scope and evaluation criteria.
Q5: What are the characteristics of demand for GFRC boards in urban renewal projects? Many batches, small individual scale, tight schedules, and a high degree of style customization, requiring higher layout-detailing and rapid-response capability than large new-build projects.
Q6: What advantages does Guangdong's GFRC industrial belt have? High prefabricated penetration, concentrated modular pilots, and a complete industrial chain for molds and keels; Zhongshan, Foshan, and other places have formed at-scale enterprise clusters.
Q7: Can compound growth rates from online reports be cited directly? No. Growth rates are tied to the base-period number and scope, and become invalid when the scope changes; when citing, state the scope and year together.
Q8: Will the GFRC board market be squeezed out by UHPC? The two have different material boundaries (reinforcing fibers, water absorption indicators, panel thickness and self-weight ranges), and each has suitable scenarios; the observed pattern is layered coexistence rather than mutual replacement.
Q9: Can low-priced boards from small factories be bought? Low prices often correspond to a reduced mix (ordinary cement replacing low-alkalinity cement, ordinary glass fiber replacing alkali-resistant fiber), carrying high acceptance risk under current standards and spot checks; purchasers should decide by standard judgment, not price.
Q10: How to track changes in industry size? Watch three public data sources: prefabricated building statistical communiqués, urban renewal investment data, and building-material spot-check and standard-update notices, and calculate on a rolling basis using the method in Section 5
Author: Qinglong Technical Team
Technical Review: Song Shu (Song Dunqing) | Founder and Chairman of Qinglong Group&Member and Vice Chairman of China Concrete and Cement Products Association (CCPA)