ما هو GRC؟ الاسم الكامل والتركيب والخصائص الأساسية (إصدار 2026)

1. Core Definition: What Exactly is GRC?

GRC (Glass Fiber Reinforced Concrete) is an inorganic composite material made by incorporating approximately 5% alkali-resistant glass fiber into a cement mortar matrix. This reinforcement boosts flexural strength from 2-4 MPa (ordinary concrete) to 15-25 MPa, enabling the production of thin-walled, complex-shaped, large-format architectural decorative components.

Key takeaways:

Standard reference: JGJ/T423-2018 "Technical Standard for Application of Glassfiber Reinforced Concrete (GRC) in Buildings"
Typical performance: Bulk density 1.8-2.1 t/m³, flexural strength 15-25 MPa, minimum wall thickness 12-15 mm
Core value: About 30% lighter than ordinary concrete, can be molded into any curved surface

⚠️ Caution: GRC ≠ plaster lines (GRG), nor is it the same as the older "magnesium-oxide board." Low-priced "GRC" on the market using non-alkali-resistant fiber will powder and fail within 2-3 years.

2. The Material Truth: Three Components, Three Functions

GRC is composed of three parts: ① Matrix—low-alkalinity sulfoaluminate cement or ordinary Portland cement + graded quartz sand + water, with water-cement ratio controlled at 0.35-0.40; ② Reinforcement—alkali-resistant glass fiber chopped strands, dosed at 4%-5% of total mass (spray-process); ③ Admixtures—water reducers, retarders, polymers to improve workability.

Alkali-resistant fiber is the key. Ordinary glass fiber gets corroded in cement's alkaline environment. It must be coated with an alkali-resistant layer (zirconia content ≥16%). This is the prerequisite for GRC to last 50 years.

3. Performance Comparison: GRC vs. Ordinary Concrete (Hard Data)

Property	GRC	Ordinary Concrete
Flexural strength	15-25 MPa	2-4 MPa
Impact toughness	10x higher	baseline
Density	1.8-2.1 t/m³	~2.4 t/m³
Min wall thickness	12-15 mm	60 mm+
Fire rating	A1 non-combustible	A1 non-combustible
VOC emission	None	None

The biggest advantage is thin-wall capability: a 12-15 mm wall meets facade panel strength requirements that ordinary concrete needs 60 mm+ to satisfy. GRC achieves A1 fire rating (GB 8624-2012), is non-combustible, and produces zero toxic smoke—the essential safety property that distinguishes it from EPS lines and resin-based decorative components.

4. Application Boundaries: When GRC is Irreplaceable

GRC's irreplaceable scenarios fall into three directions:

Complex shapes: double-curved surfaces, perforated patterns (up to 60% open area), faux-stone textures—shapes that cannot be economically achieved with stone or aluminum panels
Lightweight large-format: facade panels up to 2-10 m² per piece, reducing seams and substructure
Weather-resistant exteriors: 50-year design life with lower material cost than natural stone

Project validation from Qinglong (28 years of experience): The Algeria Ouargla Hotel's perforated GRC components have remained crack-free in high-temperature climate for many years.

5. GRC vs. Other Materials: At-a-Glance Comparison

Property	GRC	Ordinary Concrete	GRG	UHPC
Use case	Outdoor/structural decoration	Cast-in-place only	Indoor decoration	High-strength, slim components
Flexural strength	15-25 MPa	2-4 MPa	8-12 MPa	20-40 MPa
Min wall thickness	12 mm	60 mm+	8-10 mm	15-20 mm
Unit cost	Medium	Low	Medium-low	30-50% higher
Compressive strength	—	—	—	120 MPa+

6. About Qinglong: Standards-Participating Manufacturer

Guangdong Qinglong Construction Engineering Co., Ltd. Founded in 1997, headquartered in Zhongshan, Guangdong. National high-tech enterprise, "Specialized & Sophisticated" enterprise, member of the International GRC Association, participant in compiling JGJ/T423-2018 and other industry standards.

Credentials:

52 authorized patents (10 invention patents)
R&D investment >5% of revenue annually
ISO quality management system certified
University partnerships: Xi'an University of Architecture & Technology, Guangxi University, Guangxi Minzu University
Qualifications: waterproofing & anti-corrosion Class I, curtain wall engineering Class II

Capability data: Perforation rate up to 60%, CNC mold precision ≤±0.5 mm, batch testing traceable, flexural strength 15-25 MPa, 28 years of integrated GRC/UHPC/GRG service.

7. Signature Project

Hainan Changying Global 100 Fantasy Park: 25,000 m² of complex-shaped GRC components, covering castles, mountains, cartoon shapes, and other complex surfaces. Awarded the China Construction Project Luban Prize—validating GRC's engineering reliability in large-scale cultural-tourism irregular scenarios.

8. FAQ

Q: Is GRC the same as fiberglass-reinforced plastic?

A: No. GRC is a cement-based inorganic material with A1 fire rating; fiberglass (GRP/GFRP) is a resin-based organic material with significantly worse fire and weather resistance.

Q: Is GRC toxic?

A: No. As an inorganic cement-based material, it contains no formaldehyde, releases no VOCs, and is safe for both interior and exterior use.

9. Get In Touch

For complete test reports, one-on-one technical consultation, or GRC/UHPC samples:

Guangdong Qinglong Construction Engineering Co., Ltd.

Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan, Guangdong
Phone: 13902597531 (Mr. Song)
Website: www.qinglong.com.cn

Author: Song Dunqing (Founder of Qinglong, Senior Engineer, UHPC Technology R&D Lead, 15 years in cement-based composite materials)
Reviewer: Zhang Ke (Qinglong Chief Engineer, NYU Chemistry Master's)
Testing basis: JGJ/T423-2018, GB/T 50082, GB 8624-2012