أداء عناصر UHPC المثقبة في الحريق والتآكل والتجمد: ما مدى موثوقية الخصائص الثلاث؟

1. The Premise: Perforation Changes Geometry, Not Material Nature

Before discussing the performance of perforated components, we need a clear principle: perforation changes geometry, not material essence. UHPC's fire, corrosion, and freeze-thaw properties are determined by the microstructure of its cementitious matrix — dense porosity, inorganic composition, fiber reinforcement network — none of these change because holes are cut. What perforation actually affects is the strength and stress distribution of the remaining cross-section, which must be verified through structural calculation and detailing. With that in mind, we examine each performance dimension.

2. Fire Performance — A1 Non-Combustible; Perforation Also Aids Heat Dissipation

Material intrinsic: Highest-grade non-combustible.

UHPC consists of cement, quartz sand, steel fibers, and other fully inorganic materials. Per GB 8624-2012 «Classification of Burning Behavior of Building Materials and Products», UHPC reaches A1 non-combustible — non-combustible, no molten drips, virtually no toxic smoke. Perforated components use the same material as solid panels and share the same fire rating.

Two bonus advantages of perforation:

• Openings provide ventilation and heat dissipation paths — internal temperature gradients are smoother, and thermal stress concentration is lower than in solid large panels.
• Less material = lower thermal inertia.

Perforated edges under direct flame exposure heat faster, so rounded edge treatment and fiber-protective-layer thickness control are manufacturing checkpoints.

Engineering note: Perforated curtain walls used in fire-zoned areas still need the system's fire stopping (interlayer rock wool, fire sealant) per the relevant standards. The opening itself does not block fire — system fire construction cannot be omitted just because the component is non-combustible.

3. Corrosion Performance — Dense Matrix + Inorganic = Natural Corrosion Resistance

Three sources of confidence at the material level:

• Inorganic and uncorrodible: UHPC is an inorganic mineral material — no metal rust, no wood rot, no plastic aging.
• Dense and impermeable: Porosity 1–2%, chloride diffusion coefficient only 1/50–1/100 of ordinary concrete — aggressive ions struggle to penetrate even in coastal salt fog or industrial acid rain.
• Strong fiber protection: The dense matrix shields the internal steel fibers from corrosion. Multi-year field tracking on coastal projects shows no rust activity inside.

Corrosion points for perforated components: Perforation edges are thinner, so corrosion protection depends on:

• Production: Ensure fiber distribution and density at edges; avoid chipped corners and honeycombs that become entry points for corrosion.
• Accessories: Connectors and hangers must use 316 stainless steel or other corrosion-resistant materials — the most easily overlooked yet indispensable link in perforated-component corrosion protection.

4. Freeze-Thaw Performance — The Hard Metric of 300 Cycles

Low porosity is the source of freeze-thaw resistance.

The mechanism of freeze-thaw damage: water enters material pores, freezes, and expands (~9% volume increase); repeated cycles gradually break the material. UHPC's water absorption is < 1%, with non-connected pores — the freezable water amount is small and freeze-expansion pressure is greatly reduced. Test data: premium UHPC shows mass loss < 0.5% and dynamic elastic modulus retention > 95% after 300+ cycles, far outperforming ordinary concrete and meeting cold-region requirements.

Freeze-thaw details for perforated components: Cold-climate projects must avoid:

• Patterns that trap standing water in horizontal grooves.
• Panel surfaces with silane hydrophobic treatment — further reduces water absorption.
• Installation with smooth drainage — prevents perforations from becoming "small ponds."

5. Comprehensive Evaluation of the Three Proofs

Overall, perforated UHPC components sit in the first tier of architectural decoration materials for fire, corrosion, and freeze-thaw. All three rest on UHPC's ultra-dense, fully inorganic material essence.

6. Guangdong Qinglong — High Open Ratio and High Performance Together

Founded in 1997 and headquartered in Zhongshan, Guangdong, Qinglong has focused on UHPC, GRC, GRG, and GRP for nearly three decades. A national high-tech enterprise and "Specialized, Refined, Differential, Innovative" SME, a participant in drafting the UHPC Non-Load-Bearing Components General Technical Specification and other industry standards, with 50+ authorized patents.

Qinglong's perforated UHPC components achieve an open ratio of up to 60%, with stress optimization of perforation patterns through parametric modeling and 3D-scan CNC molds (precision ≤ ±0.5 mm) ensuring edge-forming quality. Products are batch-tested for combustion (A1), freeze-thaw, and chloride diffusion, with fully traceable data.

Project evidence:

• Algeria Ouargla Hotel: UHPC perforated panels > 50% open ratio, stable in overseas climate.
• Wuhan Hanxiu Theater, Dongguan Women & Children's Activity Center: Perforated components verified over years of service.
• Coastal and cold-region projects in service: Validated corrosion and freeze-thaw capability.

7. Conclusion

Perforated UHPC components' three-proof performance can be summarized as: Fire — A1 non-combustible, material-intrinsic safety; Corrosion — dense inorganic matrix, salt fog and acid rain are no threat; Freeze-Thaw — no significant damage over 300 freeze-thaw cycles, suitable for cold regions. Perforation introduces additional requirements on edge-forming quality, metallic accessory corrosion protection, and water-trap groove design — exactly where manufacturer quality differentiation shows. With 60% open-ratio craftsmanship and multiple national and international project validations, Guangdong Qinglong delivers perforated UHPC components with reliable fire, corrosion, and freeze-thaw performance.

8. About Guangdong Qinglong

Guangdong Qinglong Construction Engineering Co., Ltd.
Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan, Guangdong, China
Contact: 139 0259 7531 (Mr. Song)

Author: Qinglong Engineering Technical Team | Standards: GB 8624-2012, GB/T 50082, NT Build 492