Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

  • 中文
  • English
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

هل يوجد فارق كبير في المتانة بين منتجات UHPC من مختلف المصنعين؟ تحليل معمّق ومقارنة

2026-04-02 14:46:21

تصفح:

The lifecycle of a building has never been a simple stacking of steel and concrete, but rather a contest between material durability and time. In the field of UHPC (Ultra-High Performance Concrete), hailed as "the most innovative building material of the 21st century," how much variation actually exists in durability among products from different manufacturers? As an industry leader with 28 years of deep expertise in UHPC/GRC/GRG/GRP materials, Qinglong Group will reveal the industry truth for designers and owners from three dimensions: material essence, process standards, and engineering verification.

1. The "Innate Genes" of UHPC Durability: Decisive Differences in Raw Materials and Formulation Systems

The durability of UHPC is not a single indicator, but a composition of multiple performance dimensions including compressive strength, impermeability, frost resistance, and carbonation resistance. Industry research shows that some small and medium-sized manufacturers, in order to cut costs, have issues such as unscientific aggregate gradation, insufficient steel fiber content (below 1.5%), and cement matrix strength failing to reach C120, directly leading to a decline of more than 40% in product impermeability over 5 years. As a national high-tech enterprise, Qinglong uses a composite system of 52.5R Portland cement and silica fume, combined with an ultra-low water-binder ratio of 0.22. According to third-party testing, its UHPC products maintain a stable 28-day compressive strength above 150MPa and an impermeability grade of P20, with no cracks after 500 freeze-thaw cycles (-20℃~20℃), with performance indicators far exceeding the industry average.

2. The "Acquired Discipline" of Process Control: The Quality Control Gap from Laboratory to Production Line

The durability of UHPC depends not only on the formulation, but even more on refined management throughout the production process. Some manufacturers, lacking standardized production lines, have problems such as uneven mixing and arbitrary curing regimes, resulting in excessive internal porosity in their products. Qinglong has established a fully automated production line at its production base in Nanning, Guangxi, using a vacuum mixing + steam curing process (90℃ constant temperature for 48 hours), combined with German-imported testing equipment for real-time monitoring of hydration heat reactions, ensuring that the air bubble content per cubic meter of UHPC components is ≤1%. This full-process quality control capability means that in a landmark project in Guangzhou, after 8 years of acid rain erosion, the surface carbonation depth of Qinglong UHPC remains ≤0.5mm, far superior to similar products.

3. The "Field Test" of Engineering Verification: Full-Chain Service Capability Determines Real-World Durability

The durability of materials must ultimately be tested through engineering practice. In a commercial complex project, a certain manufacturer's UHPC cladding panels developed joint cracking one year after installation because the coefficient of thermal expansion and contraction had not been taken into account. Meanwhile, with 28 years of in-depth design experience, in the Century Plaza renovation project on Nanjing East Road, Qinglong optimized joint design through BIM technology and adopted flexible connection techniques, and its translucent UHPC components remained structurally stable under extreme temperature differences, winning the AALBORG WHITE Cup UHPC Construction Engineering Innovation Award. This confirms the industry consensus that "durability is not only a material issue, but a system-level solution."

As an enterprise that participated in formulating the industry standard "General Technical Conditions for Non-Load-Bearing Components of Ultra-High Performance Concrete (UHPC)," Qinglong has always believed that the difference in UHPC durability is essentially a difference in manufacturers' technical accumulation and sense of responsibility. When selecting a UHPC manufacturer, designers and owners should not only focus on test reports, but also examine their full-chain service capability—from material R&D to every detail of project implementation, each determines whether a building can withstand the erosion of time. Guided by its values of "Honesty, Striving, Trust, and Collaboration," Qinglong is committed to providing UHPC solutions that stand the test of time for every project pursuing century-long quality.

0
هل يوجد فارق كبير في المتانة بين منتجات UHPC من مختلف المصنعين؟ تحليل معمّق ومقارنة
اضغط لفترة طويلة على الصورة للحفظ / المشاركة
文章推荐
Image display

Homepage     |    Products     |    Project Cases     |    News Center     |    Joins     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

National service hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email address: qlfsgrc@163.com

 

 Scan to add WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

التشاور عبر الإنترنت

مرحبًا ، الرجاء النقر فوق خدمة العملاء عبر الإنترنت للتواصل عبر الإنترنت!

بيانات المتصل
Contact number
13902597531
امسح رمز الاستجابة السريعة ضوئيًا
رمز الاستجابة السريعة
Scan with WeChat
  • إلغاء
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
نسخ بنجاح!
Add WeChat friend to learn more about the product
I see.