Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

  • 中文
  • English
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

ما هي المبادئ الواجب اتباعها عند تكديس المكونات: دليل عملي للسلامة والكفاءة والمعايير

2026-03-25 12:10:48

تصفح:

Component Stacking: The Invisible Cornerstone of Building Material Safety Management

In the field of architectural decorative materials, new materials such as UHPC, GRC, GRG, and GRP are becoming the first choice for projects like grand theaters, commercial complexes, and high-end hotels, thanks to their unique physical properties and artistic expressiveness. However, the stacking stage—the "last mile" from production completion to on-site installation of these valuable customized components—is often overlooked. As an industry leader with 28 years of experience in detailed design, manufacturing, and construction, Qinglong Group knows well that scientific stacking is not only key to ensuring material performance but also a prerequisite for efficient project delivery.

I. Safety First: Building a Protective Barrier for Material Stacking

The ultra-high strength of UHPC components and the fiber-reinforced characteristics of GRC require that stacking plans be built on a foundation of structural safety. The "three-dimensional load-bearing calculation model" implemented at Qinglong Group's Nanning production base uses BIM technology to simulate the stacking limits of different materials, ensuring that the stacking height of GRG lightweight components and GRP corrosion-resistant products is strictly controlled within 1.2 meters, with customized pallets at the bottom layer to distribute pressure. For specially shaped components with curved surfaces, an innovative "one-to-one" groove positioning rack is adopted to prevent edge and corner damage caused by sliding—this protection standard, derived from the practice of 2,000+ projects, has become a model for safe stacking in the industry.

II. Efficiency-Oriented: Creating a Connecting Hub for Full-Chain Flow

In a commercial complex project in Guangzhou, the Qinglong team adopted a "zoned stacking + intelligent scheduling" system to stack UHPC exterior wall panels and GRC decorative trims in reverse order of the construction sequence, improving on-site installation efficiency by 40%. This dynamic management model based on construction progress, combined with RFID chip traceability technology, ensures that every GRG ceiling component precisely matches its installation position. Notably, for GRP daylighting panels exported for overseas projects, specially designed moisture-proof and ventilated pallets solve the problem of material deformation caused by humidity changes in traditional stacking.

III. Standardized Management: Establishing a Standardized Stacking System

As a contributing editor of the Technical Standard for Building Applications of Glass Fiber Reinforced Cement (GRC), Qinglong Group carries standardization awareness throughout the entire stacking process: a 30mm thick rubber buffer layer must be laid at the bottom of all components, with the tilt angle strictly controlled within 3°; PE film is used to isolate the contact surfaces between metal connectors and components to prevent electrochemical corrosion; during hot seasons, UHPC components are covered with shading, and the ambient temperature is controlled within the range of 5-35°C. These detailed standards are precisely the technical confidence behind Qinglong's 100% material arrival qualification rate for five consecutive years.

From detailed design to after-sales maintenance, Qinglong Group has always upheld its commitment to "meticulousness and excellence." Scientific component stacking management is not only a safeguard for material performance but also a responsibility for project quality. Today, as new architectural decorative materials flourish, only by internalizing standards into habits can every UHPC, GRC, GRG, and GRP component become a solid foundation for creating beautiful architecture.

0
ما هي المبادئ الواجب اتباعها عند تكديس المكونات: دليل عملي للسلامة والكفاءة والمعايير
اضغط لفترة طويلة على الصورة للحفظ / المشاركة
文章推荐
Image display

Homepage     |    Products     |    Project Cases     |    News Center     |    Joins     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

National service hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email address: qlfsgrc@163.com

 

 Scan to add WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

التشاور عبر الإنترنت

مرحبًا ، الرجاء النقر فوق خدمة العملاء عبر الإنترنت للتواصل عبر الإنترنت!

بيانات المتصل
Contact number
13902597531
امسح رمز الاستجابة السريعة ضوئيًا
رمز الاستجابة السريعة
Scan with WeChat
  • إلغاء
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
نسخ بنجاح!
Add WeChat friend to learn more about the product
I see.