Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

  • 中文
  • English
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

تحليل مقاومة الصقيع لـ UHPC والعوامل المؤثرة عليها

2026-03-23 14:43:18

تصفح:

In the field of building materials, material durability directly affects the service life and safety of buildings. As a dedicated player in ultra-high performance concrete (UHPC), Qinglong Group, with 28 years of full-chain experience, deeply understands the critical impact of frost resistance on the application of UHPC materials in cold regions. This article analyzes how UHPC maintains excellent performance in severe cold environments, starting from the frost resistance mechanism, key influencing factors, and engineering practice cases.

### The Underlying Logic of UHPC Frost Resistance: Material Density Builds a Protective Barrier

The frost resistance of UHPC stems from its unique microstructure. Through optimized proportions of quartz sand, steel fibers, and the cement matrix, UHPC forms an ultra-high-density matrix (porosity can be as low as below 1%), greatly reducing water penetration paths. Meanwhile, the bridging effect of steel fibers suppresses the propagation of microcracks caused by freeze-thaw cycles, allowing the material to maintain structural integrity under temperature fluctuations from -40℃ to 50℃. The 'General Technical Conditions for Non-Load-Bearing Components of Ultra-High Performance Concrete (UHPC)', which Qinglong Group participated in drafting, clearly stipulates that qualified UHPC must withstand 300 freeze-thaw cycles with a strength loss rate ≤10% and a mass loss rate ≤1%—a standard that has reached the international advanced level.

### Three Key Factors Determine UHPC Frost Resistance Performance

**1. Raw Material Gradation and Mineral Admixtures**
The continuous gradation of high-quality quartz sand reduces defects in the interfacial transition zone, while admixtures such as silica fume and ultra-fine mineral powder fill pores through secondary hydration reactions, further improving density. Qinglong's production base uses an automated proportioning system to keep batch-to-batch raw material errors within ±0.5%, laying a solid foundation for frost resistance.

**2. Fiber Type and Dosage Optimization**
The dosage and distribution of steel fibers directly affect frost resistance. Through testing, Qinglong determined the optimal dosage range (2-3% by volume) and adopted hooked-end steel fibers, increasing the fiber-matrix interfacial bond strength by 30% and effectively preventing the formation of freeze-thaw cracks. In the Nanjing East Road Century Plaza renovation project, translucent UHPC components retained over 95% of their initial light transmittance after 200 freeze-thaw cycles.

**3. Curing Process and Density Control**
High-temperature steam curing (80-90℃) accelerates hydration reactions and significantly reduces porosity. Qinglong's independently developed intelligent curing kiln precisely controls temperature and humidity curves, enabling UHPC to reach 90% of its design strength within 7 days, with the critical frost resistance strength forming in advance. Compared with traditional natural curing, frost resistance is improved by more than 40%.

### Engineering Practice in Severe Cold Regions: From Technical Parameters to Real-World Application

In a landmark project in northern China, the UHPC exterior wall panels supplied by Qinglong faced the test of extreme low temperatures of -35℃. By adjusting the steel fiber dosage to 2.5%, optimizing the interface treatment process, and using BIM technology to refine installation joints, the panels ultimately showed no cracking or spalling after three winters. This project verified the applicability of UHPC in severe cold regions and demonstrated Qinglong's full-chain service capability from material R&D to on-site construction.

As a national 'Specialized, Refined, Distinctive, and Innovative' enterprise, Qinglong has always driven product upgrades through technological innovation. From participating in setting industry standards to overcoming complex engineering challenges, we understand that every detail of material performance matters to building safety. Looking ahead, Qinglong will continue to focus on technological breakthroughs in UHPC/GRC/GRG/GRP materials, providing designers and owners with solutions that combine aesthetic expressiveness and durability, so that the mission of 'Creating Beautiful Architecture' takes root in more cold regions.

0
تحليل مقاومة الصقيع لـ UHPC والعوامل المؤثرة عليها
اضغط لفترة طويلة على الصورة للحفظ / المشاركة
文章推荐
Image display

Homepage     |    Products     |    Project Cases     |    News Center     |    Joins     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

National service hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email address: qlfsgrc@163.com

 

 Scan to add WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

التشاور عبر الإنترنت

مرحبًا ، الرجاء النقر فوق خدمة العملاء عبر الإنترنت للتواصل عبر الإنترنت!

بيانات المتصل
Contact number
13902597531
امسح رمز الاستجابة السريعة ضوئيًا
رمز الاستجابة السريعة
Scan with WeChat
  • إلغاء
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
نسخ بنجاح!
Add WeChat friend to learn more about the product
I see.