Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!

Site Map   |  Contact Qinglong   | 

  • 中文
  • English
Qinglong UHPC & GRC

UHPC & GRC Complex Architecture Manufacturing

A Global Benchmark in Smart Architectural Fabrication

400-777-2203
0760-88706348
13902597531
Image display
资讯中心

ما متطلبات دقة القوالب لتصنيع ألواح UHPC مزدوجة الانحناء وتحليل العوامل المؤثرة

2026-03-17 14:00:36

تصفح:

In the field of architectural decoration, UHPC double-curved panels have become the preferred material for landmark building envelope design thanks to their outstanding mechanical properties and artistic expressiveness. However, their complex curved surfaces place stringent demands on mold precision—this not only concerns product forming quality but also directly affects the building's final visual appearance and structural safety. As an industry expert with 28 years of full-chain experience in UHPC/GRC/GRG/GRP, Qinglong Group will provide an in-depth analysis of the core technical points of double-curved panel molds from three aspects: precision standards, influencing factors, and solutions.

I. Precision Benchmarks of UHPC Double-Curved Panel Molds: From Millimeter-Level Error to Micron-Level Control

Precision control of double-curved panel molds must run through the entire process of design, machining, and assembly. The general industry standard requires mold contour dimensional error of ≤±1mm and surface fitting error of ≤±0.5mm/m, while Qinglong Group, by introducing BIM parametric design and 3D scanning technology, keeps errors within ±0.3mm, reaching a domestically leading level. This precision standard is based on two core requirements: first, ensuring seamless jointing during double-curved panel installation—for example, in a grand theater project, the cumulative jointing error of more than 5,000 double-curved UHPC curtain wall panels had to be kept within 5mm; second, ensuring the fluidity and compactness of concrete during pouring, so as to avoid defects such as air bubbles and honeycombing caused by uneven mold surfaces.

II. Five Key Factors: The "Hidden Codes" That Determine Mold Precision

1. Material Selection and Structural Design: The mold base material must meet both stiffness and toughness requirements. Qinglong uses customized high-strength aluminum alloy profiles combined with steel structure composite frames, reducing the deformation rate by 80% compared with traditional wooden molds. Taking a double-curved sunshade panel project for a commercial complex as an example, the mold weighs 300kg yet achieves 0.1mm-level deflection control.

2. Machining Equipment and Process Level: The application of five-axis machining centers has raised mold surface machining precision to ±0.05mm; combined with real-time calibration by laser trackers, it ensures the geometric accuracy of complex double-curved surfaces. The 6-meter-class five-axis machine tool at Qinglong's production base can complete the overall machining of 12-meter-long double-curved molds in one pass.

3. Temperature and Humidity Environmental Control: Temperature and humidity variations during mold machining and use cause materials to expand and contract. Qinglong manufactures molds in a constant-temperature workshop (temperature controlled at 20±2℃ and humidity at 50±5%) and adopts an intelligent mold system with built-in temperature sensors to compensate in real time for dimensional deviations caused by environmental factors.

4. Assembly and Positioning Technology: The jointing precision of modular molds directly affects overall error. By adopting mortise-and-tenon structures and pin positioning technology, Qinglong keeps mold assembly error within 0.2mm, achieving 60% higher efficiency than traditional bolt connections.

5. Inspection and Calibration System: From raw material entry to mold delivery, Qinglong has established a "three-inspection system" (self-inspection, mutual inspection, and specialized inspection), using 3D scanners (precision 0.02mm) and blue light detection equipment for full-dimension verification, and has provided high-precision mold solutions for a cumulative total of 300+ domestic and international projects.

III. The Industry Value of Precision Control: From Product Quality to Project Benefits

Improved mold precision not only brings a leap in product quality but also creates significant project value. Taking the T3 terminal project of an international airport that Qinglong participated in as an example, the UHPC double-curved roofing system produced with high-precision molds achieved a 40% increase in on-site installation efficiency, reduced the rework rate to below 0.5%, and saved 15% in overall costs. This confirms the industry consensus that "mold precision is the cornerstone of realizing the value of UHPC double-curved panels."

As a national high-tech enterprise and a participant in formulating UHPC industry standards, Qinglong Group has always upheld the philosophy of "meticulousness and constant refinement," regarding mold precision control as the core of technological innovation. In the future, with the application of technologies such as 3D-printed molds and intelligent sensing monitoring, the precision boundaries of UHPC double-curved panels will continue to be pushed forward, bringing more possibilities for the fusion of aesthetics and technology in the architectural decoration industry. Choose Qinglong, and choose a full-chain solution that controls double-curved panel quality from the source.

0
ما متطلبات دقة القوالب لتصنيع ألواح UHPC مزدوجة الانحناء وتحليل العوامل المؤثرة
اضغط لفترة طويلة على الصورة للحفظ / المشاركة
文章推荐
Image display

Homepage     |    Products     |    Project Cases     |    News Center     |    Joins     |    About Us     |    Contact Us

 Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province

National service hotline: 400-777-2203

Business Hotline: 0760-88706348      Mobile: 13902597531

Email address: qlfsgrc@163.com

 

 Scan to add WeChat

Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved  . Recordation Number: 粤ICP备13069248号-24

التشاور عبر الإنترنت

مرحبًا ، الرجاء النقر فوق خدمة العملاء عبر الإنترنت للتواصل عبر الإنترنت!

بيانات المتصل
Contact number
13902597531
امسح رمز الاستجابة السريعة ضوئيًا
رمز الاستجابة السريعة
Scan with WeChat
  • إلغاء
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
نسخ بنجاح!
Add WeChat friend to learn more about the product
I see.