لا داعي للقلق عند تشقق GRC: طرق إصلاح مهنية ونصائح للوقاية

GRC cracks are not irreversible damage; the key lies in timely detection and scientific treatment. Drawing on 28 years of technical expertise, Qinglong has developed an efficient set of solutions for GRC crack treatment and prevention.

Many customers encounter surface cracking when using GRC and worry that it may affect structural safety. GRC cracks can arise from various causes, such as material quality, installation workmanship, or environmental changes. How should GRC cracks be properly treated to prevent the problem from worsening?

1. Crack Inspection: Assess the Severity First ????

Before treating GRC cracks, the width, depth, and extension of the cracks must first be inspected. Surface cracks with a width of less than 0.3mm and no obvious extension are mostly shrinkage cracks with minimal structural impact; cracks wider than 0.3mm, deeper, or continuously extending may affect structural stability and require priority treatment. When inspecting cracks in GRC components for the Library and Information Center of Dali University in Yunnan, Qinglong used professional instruments to measure crack parameters, providing an accurate basis for the treatment plan.

2. Targeted Treatment: Different Cracks, Different Solutions

For fine surface cracks, a "clean–fill–sand" process can be applied: first remove dust and debris from inside the crack with a brush, then fill the crack with special GRC repair mortar or sealant, compact and smooth it, sand it flat with fine sandpaper once dry, and finally apply a touch-up coating as needed. For deeper structural cracks, the anchoring points must first be reinforced, followed by pressure grouting to inject repair material deep into the crack and ensure it is completely filled. When treating cracks in GRC components for the Wuhan Han Show Theatre, Qinglong used customized repair materials to ensure that the repaired components perform consistently with the original structure.

3. Prevention First: Reducing Cracks at the Source

When it comes to GRC cracks, prevention is better than treatment; choosing quality products and professional installation is key. When purchasing, choose a reputable manufacturer such as Qinglong, whose products use high-quality alkali-resistant glass fibre and well-balanced mix proportions for stronger crack resistance; during installation, strictly follow the standards to ensure secure anchoring and proper joint treatment; during use, avoid impact from sharp objects and carry out regular inspection and maintenance. In addition, in regions with large temperature variations, expansion joints can be reserved during GRC installation to reduce shrinkage cracks caused by temperature changes.

GRC cracks are nothing to fear—timely, scientific treatment can effectively prevent the problem from worsening. As a GRC manufacturer with a professional technical team, Qinglong provides customers with on-site inspection and crack treatment services. With extensive project experience and professional tools, Qinglong ensures reliable treatment results. Meanwhile, through early-stage product quality control and installation guidance, the likelihood of GRC cracks is reduced at the source.