Welcome to Guangdong Qinglong Construction Engineering Co., Ltd.!
English
- 中文
- 繁體中文
- English
UHPC & GRC Complex Architecture Manufacturing
A Global Benchmark in Smart Architectural Fabrication
400-777-2203
0760-88706348
13902597531
-
New GRC Crack Treatment Process: Decision Tree for Assessment and Grading, Observation and Judgment, and Timing of Repair
The three-step process for treating new cracks in GRC (Glass Reinforced Concrete) is as follows: first, classification (surface shrinkage microcracks vs. through-force cracks); second, observation (attaching plaster monitoring stakes to observe crack propagation); and third, repair (sealing microcracks and treating propagated cracks according to structural repair techniques). This article presents the decision-making process.
-
GRC Surface Contamination Cleaning Guide: Classification and Treatment of Dust, Rust, Moss, Mold, and Oil Stains
GRC surface contamination classification cleaning: Dust can be washed with water; atmospheric pollutants (black dirt) can be treated with a neutral agent + low-pressure water; moss and mold remover can be used; rust remover with low concentration can be used; oil stains can be treated with an alkaline degreaser. Strong acids and steel wool are prohibited.
-
GRC Maintenance Manual: A Complete Plan for Daily Cleaning, Regular Inspections, and Periodic Updates
GRC maintenance has three levels: daily cleaning (1-2 times per year), regular inspections (annually, focusing on crack sealant and metal parts), and periodic renewal (coating for 10-15 years, sealant for 8-15 years, and corrosion protection for metal parts for 10 years). This article provides an executable maintenance plan.
-
A Comprehensive Analysis of the Service Life of GRC Components: 50-Year Design Benchmark and Four Major Factors Affecting Service Life
GRC is designed with a 50-year lifespan (same lifespan logic as the main structure): its lifespan depends on the alkali resistance of AR glass fiber, the density of the mix proportions, the quality of maintenance, and environmental erosion (freeze-thaw/carbonization/chloride salts). There are proven cases of high-quality GRC serving for 28 years.
-
GRC Tender Technical Specifications Writing Guidelines: Material Parameters, Performance Indicators, and Testing Requirements Template
The core contents of the GRC technical specification include: the applicable standard JGJ/T423-2018, material parameters (AR fiberglass content, cement type, slab thickness), performance indicators (flexural strength, water absorption, wet-dry cycle), testing frequency and witness sampling, and surface effect sample sealing clauses. A template for preparation is attached.
-
GRC Manufacturer Qualification List: Which are the hard requirements, and which are the bonuses?
GRC-related qualification levels are categorized into: hard thresholds (business license and scope of business, safety production), industry endorsement (standard drafting, association membership), capability certification (high-tech enterprise, patents, ISO), and construction qualifications (curtain wall, waterproofing and corrosion protection). This article analyzes each item in detail.
-
GRC Project Supervision Checklist: Site Inspection, Hidden Works, First Piece Confirmation and On-Site Monitoring
Key aspects of GRC project supervision include: component arrival acceptance (comparison of test reports and sealed samples), concealed acceptance of embedded parts, confirmation of the first piece and sample section, on-site supervision of installation nodes, and witnessing of batch testing. This article provides an executable checklist.
-
Analysis of Local vs. Out-of-Town GRC Manufacturer Selection: Balancing Transportation Costs, Response Speed, and Quality Capabilities
Choosing between local and out-of-town GRC manufacturers: Local manufacturers offer advantages such as faster response, lower transportation costs, and easier factory visits; out-of-town large manufacturers offer advantages such as the ability to handle complex and irregular shapes, case studies, and established systems. The decision should be based on the complexity of the project and the local industrial support.
-
A Comprehensive Explanation of GRC Delivery Cycles: Factors Influencing the Typical 30-50 Days and Six Shortening Strategies
The standard delivery cycle for GRC (Glass Reinforced Concrete) is 30-50 days: 7-15 days for detailing + 10-15 days for mold making + 14-21 days for production and maintenance + transportation and installation. This article analyzes the cycle structure and compression strategies: parallel mold making, first piece confirmation, accelerated maintenance, and pre-shipment.
-
GRC (Glass Reinforced Concrete) Detailed Design Responsibility Analysis: Architect Provides Intent, Manufacturer Produces Engineering Drawings
The boundaries of responsibility for detailed GRC design: The architect provides the design intent and joint principles; the GRC manufacturer completes the segmentation, mold families, pre-embedded parts, and detailed installation nodes, and is responsible for the constructability of the drawings. This article analyzes the collaborative process and the division of responsibilities.
-
GRC Quotation Avoidance Guide: Eight Hidden Items in Mold Fees, Detailing Fees, Spare Parts Fees, and Installation Fees
Common pricing pitfalls in GRC (Glass Reinforced Concrete) quotations include: mold cost amortization methods, whether detailed design fees are listed separately, unit prices for replacement parts, surcharges for irregular shapes, transportation and hoisting costs, and the allocation of testing fees. This article teaches you how to understand the quotation structure.
-
Ten key clauses in GRC procurement contracts: Technical agreement, batch acceptance, and division of responsibility for replacement parts and quality assurance.
The core clauses of a GRC procurement contract include: technical agreement appendices (mixing ratio/glass fiber content/testing standards), batch acceptance and rejection criteria, detailed design responsibilities, replacement parts and color difference handling, and warranty period responsibility allocation. This article provides a list of clauses that can be used directly.
Company Address: Room 302, No. 22 Dongming Road, Shiqi District, Zhongshan City, Guangdong Province
National service hotline: 400-777-2203
Business Hotline: 0760-88706348
Mobile: 13902597531
Email address: qlfsgrc@163.com
Scan to add WeChat
Copyright © Guangdong Qinglong Construction Engineering Co., Ltd. All Rights Reserved . Recordation Number: 粤ICP备13069248号-24
Online customer service