Does the Manufacturer Provide UHPC Product Refurbishment?

How to Clean a Dirty GRC Surface? A Complete Guide to Practical Cleaning Tips and Precautions

In the field of architectural decoration, GRC (Glass Fiber Reinforced Concrete), with its lightweight, high-strength properties and rich modeling possibilities, is widely used for exterior wall cladding panels, decorative lines, and landscape garden components in high-end venues such as grand theaters, commercial complexes, and landmark buildings. However, long-term exposure to the outdoor environment means GRC surfaces easily accumulate dust and stains and may even develop localized contamination, affecting the building's aesthetics. As an industry leader with 28 years of experience in UHPC/GRC/GRG/GRP material detailed design, manufacturing, and after-sales maintenance, Qinglong Group will share practical GRC surface cleaning techniques and key precautions from a professional perspective, helping designers, owners, and maintenance personnel scientifically maintain GRC components and extend their service life.

I. GRC Material Characteristics and Pre-Cleaning Preparation

GRC is composed of cement, glass fibers, aggregates, and admixtures, and its surface typically has a certain texture and porosity, so cleaning must balance effectiveness with material protection. Before cleaning, first identify the type of stain: daily dust can be handled with dry wiping or water rinsing, while stubborn stains such as oil marks and graffiti require targeted cleaning agents. At the same time, check whether the GRC surface has cracks, damage, or coating peeling; if so, repair it first to prevent water from penetrating inside during cleaning and causing structural damage. When undertaking GRC projects such as the Dongguan Women and Children's Activity Center, Qinglong Group always provides a detailed maintenance manual, emphasizing the condition assessment step before cleaning to ensure maintenance work is safe and effective.

II. Daily GRC Surface Cleaning Techniques: From Basic to Advanced

1. Daily dust cleaning: For surface dust accumulation, it is recommended to gently wipe with a soft brush or a slightly damp cloth, avoiding hard tools that could scratch the surface and damage the GRC texture. For larger stained areas, a low-pressure water gun may be used; the water flow direction should align with the GRC component installation direction (e.g., cleaning exterior wall cladding panels from top to bottom) to reduce residual dirty water. For more industry information: +WeChat qlfsbl123

2. Stubborn stain treatment: For oil stains, mold spots, and the like, use a neutral cleaning agent (pH 6-8) diluted and applied to the stain, let it sit for 5-10 minutes, wipe with a soft cloth, and then rinse clean with water. Note that strongly acidic or alkaline cleaning agents should be avoided, as they may corrode the GRC surface or destroy the bond between the glass fibers and the cement matrix. For graffiti, first try a specialized graffiti remover; if it does not work well, it is recommended to contact a professional maintenance team to handle it using physical methods such as mechanical grinding, ensuring the GRC structure is not damaged.

3. Cleaning in special environments: In coastal areas or places with severe industrial pollution, GRC surfaces may develop salt efflorescence or chemical deposits, requiring regular deep cleaning (recommended every six months). A professional GRC-specific cleaning agent can be used together with a soft sponge for gentle scrubbing; after cleaning, promptly rinse with water and wipe dry to prevent residues from re-adhering.

III. Precautions for GRC Cleaning: Avoiding Common Mistakes

1. High-pressure flushing is prohibited: Some personnel, seeking cleaning efficiency, use high-pressure water guns (over 10MPa) to directly flush GRC surfaces, which may cause surface cement paste to fall off, expose glass fibers, or even cause component cracking. During its participation in drafting the "Technical Standard for Application of GRC in Buildings" (JGJ/T423-2018), Qinglong Group clearly stipulated that GRC cleaning water pressure should be controlled at 2-5MPa to protect the structural integrity of the material.

2. Control cleaning frequency: Over-cleaning accelerates GRC surface aging. It is recommended to adjust the cleaning cycle according to the usage environment—generally 1-2 times per year for ordinary buildings, and once per quarter for heavily polluted areas. Also, cleaning should be avoided in high-temperature (above 35°C) or low-temperature (below 5°C) environments to prevent cleaning agents from evaporating too quickly or freezing and damaging the surface.

3. The importance of professional maintenance teams: For large GRC curtain walls or complex-shaped components, it is recommended to entrust a qualified professional team with the cleaning. As a National High-Tech Enterprise, Qinglong Group has a comprehensive after-sales maintenance system, providing full-process services from stain analysis and plan formulation to on-site implementation, ensuring cleaning work is both efficient and safe. For more industry information: +WeChat qlfsbl123

IV. GRC Cleaning and Long-Term Maintenance: Enhancing Architectural Aesthetics and Durability

Cleaning is an important part of GRC maintenance, but not all of it. Daily attention should also be paid to checking whether the anchoring system of GRC components is loose and whether the sealant is aging, addressing problems promptly. In UHPC/GRC projects such as the East Nanjing Road Century Plaza renovation, Qinglong Group's integrated maintenance approach of "cleaning + inspection + repair" has kept materials in good appearance and performance over the long term. For owners and designers, choosing a manufacturer with full-chain service capabilities (such as Qinglong Group) not only provides quality GRC products but also professional support in later maintenance, achieving dual protection of architectural aesthetics and durability.

In short, GRC surface cleaning should follow the principles of "scientific assessment, gentle treatment, and professional support," avoiding material damage caused by improper operation. As a leading enterprise in the UHPC/GRC/GRG/GRP field, Qinglong Group has always taken "creating beautiful architecture" as its mission. Through 28 years of technical accumulation and service experience, it provides customers with comprehensive solutions from design to maintenance, allowing every GRC decoration to showcase its unique charm for a long time.